ClimateRight CR-2550 El manual del propietario descargar pdf (Pagina 89)

3-20

CHAPTER 3

DTS Remote Control- Throttle Only Mode

The throttle only feature permits the captain to operate the throttle

without shifting the engine into a gear. This is especially useful to

properly warm up the engine before an outing. To use the throttle only

feature ﬁ rst assumes the engine has been started.

1. Ensure the control handle is in the straight up

or neutral position.

2. Press and hold the throttle only button located

on the control handle.

3.Squeeze the shift lock button inward and

advance the control handle to the forward detent

position.

4. Hold in the throttle only button until the horn

sounds twice. The horn is located under the helm

and it alerts the operator that they are in the neutral

throttle only mode.

5. Push the control handle forward to advance the

throttle. Monitor the tachometer as needed for

proper revolutions per minute (RPM).

6. To disengage from the throttle only position, bring the control handle

back to the neutral position.

Note: You can use the start/stop switch on the control handle to restart

the engine and to stop a running engine. Make sure the contol handle

is in the neutral position. Simply press the start switch to crank over

the engine. The ignition must be in the “on” position for the engine

to start.