ClimateRight CR-2550 El manual del propietario descargar pdf (Pagina 206)

Equipment Operation

6-63

Seating-Bucket Operation

The bucket seat features a handle mechanism that operates multiple

seat functions. The separate handles prevent the seat from rotating and

sliding fore and aft during operation of the vessel. This provides the

operator with a safety margin. Do not alter the seat slide mechanism.

To adjust the seat slider follow the instructions and refer the

illustration.

1. To adjust fore and aft seat positions, pull up on handle “A”, slide

seat to desired location and release the handle. The slide will lock in

position.

2. To rotate seat and adjust the drag control feature for rotation, pull

handle “B” up to the horizontal position and release. The handle will

maintain the horizontal position. The seat is now able to be rotated

360 degrees. To increase the drag on rotation, turn handle “C”

clockwise to desired resistance. To decrease drag, turn handle “C”

counterclockwise.

3. To lock the rotational feature, push handle “B” down and the positive

quick lock feature looks for the next available locking spline.

Always use the positive lock feature when your vessel is

underway.

CAUTION

TO PREVENT BODILY INJURY!

PERIODICALLY CHECK AND TIGHTEN

THE MOUNTING BOLTS

BETWEEN THE SEAT SLIDER

AND THE BUCKET SEAT BOTTOM

ALSO, CHECK THE FLOOR INSERT BOLTS.