ClimateRight CR-2550 El manual del propietario descargar pdf (Pagina 286)

Cosmetic Care & Maintenance

7-41

Checking MerCrusier Stern Drive Oil

CAUTION

ENVIRONMENTAL HAZARD!

DISCHARGE OF OIL OR OIL WASTE

INTO THE ENVIRONMENT IS RESTRICTED BY

LAW. DO NOT SPILL OIL OR OIL WASTE INTO THE

ENVIRONMENT WHEN USING OR SERVICING

YOUR VESSEL. DISPOSE OF OIL OR OIL WASTE

AS DEFINED BY LOCAL & STATE AUTHORITIES.

1. Drive oil level must be checked with the engine cold before

starting.

2. Check the gear oil level in the reservoir located on the engine. Keep

the gear oil level at the recommended ranges as marked on the reservoir.

If any water is visible at the bottom of the reservoir or there are any

metal chips in the drive oil do not run the engine since component

damage can result. Contact your Regal dealer for more information.

Filling the Stern Drive

1. If more than 2 ounces of High Performance

Gear Lubricant is required to ﬁ ll the monitor

reservoir a seal may be leaking. Contact your

Regal dealer.

2. If drive lubricant is free from water and

metal chips proceed to fill the reservoir.

Remove the gear lube monitor cap. Fill

the reservoir with High Performance Gear

Lubricant (Merc part # 92-802854A1).

A=Drive Reservoir